I now have been using it for almost 2 years, and it’s time to share with you guys what are my impressions.

Pros

• it’s one of the cheapest
• the blade is good
• it’s easy to transport
• it has a built in crosscut sled

Cons

• the rip guide is not perfect
• it is difficult to ripcut pieces larger than 300 mm (but you can easily build an attachment piece where you can clamp the rip cut guide for max 20 €)
• the dust collection is not superb: for this reason I designed a 3D PRINTED DIY DUST COLLECTOR a blade cover with buil-in dust collection port. You can download here the 3D print files.
• you can’t use a dado stack
• the t-slots are not standard, so it is hard to find guides that fit. For this reason I designed and printed my own Zero Play Guides.
• the blade adjusting knob is really not good even though it does the job.

I recommend you to have a look at the jigs and tools I’ve made myself to have more satisfying results from this table saw:

• Zero Play Guides to be used on all sort of table saw sleds
• Simple DIY Crosscut Sled
• Simple extension plane
• 3D printed FEATHERBOARD
• DIY Picture Frame Sled
• AUTOMATED Arduino Finger Joint Jig
• Cyclonic shop vac dust extractor
• Blade dust extractor