Category: Arduino
The Smart Finger-Box Joint Jig
As promised in this post I will explain what I used to make my own automatic Finger-Box Joint for my BOSCH PTS 10 table saw but it can be also used on all other table saws with the due modifications. Please note that this page is still under construction as I will update this article…
Automatic Finger Jointer Debug
Today I had again to go through code bugs: Sometimes the motor screams without moving; For some long displacement I don’t get the displacement set; Let’s see how I found the errors. Sometimes the motor screams but doesn’t move and I found out after several checks that this was due to its stalling because I…
Arduino Smart Finger Jointer
Today is a bug hunting day. First of all I realized that for some reason the displacement wasn’t right: for a given 5 millimeters displacement from the code I had 3.8 mills on the gantry. I am not sure of the reason but I believe it could be related to the pitch of the threaded…
Smart Finger Joint
Some time ago I would have said to be lucky to have time to spend in my garage. Sadly this is not the case as this corona virus has locked down us all and caused a lot of deaths already. Many people will loose their jobs, but hopefully everything will be fixed some day. My…
Arduino Box Jointer Hardware
Sorry this page is still under construction 🙂
DIY Security System – final steps
Last things to do for this project are: Select and attach power supply to be connected directly to the line Make the system activate the alarm Add a GSM or GPRS module in order to communicate with mobile phones In this post I will briefly show you and describe what I did for the first…
DIY Security System welding
After having some coding I finally came out with a good result even if not totally completed as the gsm module is still not connected and for the time being I think I will leave it as is and try it like that in order to see if there are some kind of hidden bugs…
DIY home security control box
Hey there.. I am so happy for how it turned out!!!!! First of, if you want to use my models here is the link on Thingiverse. It’s been a tough printout! 14 hours for the top and almost 20 for the bottom but it is simply amazing. It is designed to hold the following components:…
MAK-E-VERSE 